how to fix a xbox 360 with 3 red ring of death (part 1)

All you are going to need for this fix is a torx size 8 and 10 and a heat gun and a x-clamp kit from my site good luck www.xboxparts.webs.com

3 Responses to how to fix a xbox 360 with 3 red ring of death (part 1)
  1. LilPlayers1231
    February 16, 2011 | 1:54 PM

    my jtag broke a solde under the disk drive the small wire..i re soldered it and its still redring?…any tips

  2. TheNicktito
    February 16, 2011 | 5:06 PM

    @LilPlayers1231 be very careful do not boot it up tell you have that wire reconted and once you do have it conected boot it up if goes to red ring do a reflow

  3. LilPlayers1231
    February 19, 2011 | 2:31 AM

    @LilPlayers1231 dude i soldered it better then i overheated it and it went to 2red lights i turned it off and back on and it work lol

Leave a Reply

Wanting to leave an <em>phasis on your comment?

Trackback URL http://www.xboxrepair360.com/blog/434/how-to-fix-a-xbox-360-with-3-red-ring-of-death-part-1/trackback/
Powered by WordPress Lab