Fixing the “Unplayable Disc” problem for the Xbox 360 Hitachi Disc Drive: 1.) Disassemble your 360 and strip it down to the inner machina. 2.) Unplug the two cords from the back of the disc drive. 3.) Remove the disc drive and use a knife to take off the circular piece on the top of the drive. 4.) Remove the magnet that is placed underneath the circular piece. 5.)Unscrew the top and bottom casings of the disc drive. 6.) Use a lubricant such as WD-40 to lubricate the spindle of the motor on the bottom part of the disc drive. 7.) Super-Glue the washer of the disc drive into place. 8.) Re-plug your disc drive back into your console. 9.) Eject the disc tray. 10.) Place a game disc into the disc tray. 11.) Place the top magnet over the center of your disc. 12.) Close the disc tray. 13.) Make sure the laser reads up and down the entire disc. 14.) Get back to playing your games without the “Unplayable Disc” error. -Tweed
Shut the fuck up. I don’t care if you retards are too stupid to comprehend my video. Watch a different one and don’t take the time to comment it if you don’t like it.
dude…watch the video… its unwatchable. we arent saying your method does not work.. but i mean come.. on the screen is black the whole time
i would never take a chance with my xbox 360 lol just clean it with disc cleaner haha
great video mate, helped a lot, 5 stars
lol did this with my broekn BenQ drive after i got my new one and my xbox shot the magnet and through the room ;D
mine is not reading my disc at all can someone help
When ever I put a game in. It starts to read the disc, then it just says. “Open Tray” like I never put the game in. I have to open the tray over and over until it finally reads the disc. Anyone know what to do?
yo bro i need some help i took everything apart, for the final step when you put the disk in the close it, for me when the disk starts to read it kind of jumps up and down and it just looks like something is loose idk if its the top part or what, i just need a little help
that video made me dizzy
got the same problem man
if your disc aint reading at all and theres no error coming up then put a cd rom cleaner cd in it and WALAH your xbox will play games again it might take a while so like 5-6 cleaning atempts
your a fag
@MistahX99 did it happen to you also?
I had that same problem before I got this new one but basically the x box justt wasn’t grabbing the disk so I put it in the up right position and tilted it slightly to the side and I Emphasize only slightly because to much will grind up ur game and then the x box grasps the disk and begins to spin again.
Be sure to tilt it clockwise from the front as if u were goin to turn the console upside down but, DON’T turn it up side down and do this while the console is reading the disk and then gently return the x box to its upright position GENTLY and game the fuck out of that piece of shit before its next problem. Hope that helps.
tilt it when the xbox tries to read the disk, from the upright position
@Urza83 I set it so it automatically reads the disc as soon as you turn on your system. This might help. Its in the system settings, under startup, select “disc”.
fix lighting
and all my games work..
EVERY SINGLE ONE
except mw2..
campaign doesn’t work
spec ops doesn’t work
multiplayer doesn’t work
it loads the title screen..
i got the disc resurfaced nothing happened
i did the paper slide into the xbox and it didn’t do anything
i would tilt the xbox slightly but i don’t want to risk scratching the shit out of my disc.
my problem is alot different from everyone elses
it reads but when i want to play it says disc is unreadable
microsoft lazy fat fucks
Tooth Paste helps….
for mine it plays the game then frezzes and if you eject the disk it spins and scratches and its broke two of my fav game oblivion and assassins creed 2
@sopaconsaposelee
You called him “stupet”
It’s stupid.
Free energy can change the world!But the Establishment doesn’t want ppl to know this,Get a motor that works with the power of magnets only at LT-MAGNET-MOTORdotCOM ,Free yourself!
@llTweeDll I heard that wd40 can actually make it worse. not sure if its true or not, but I;d like to know if there are any other options. pm me at pandomoix
u used a knife to take out the magnet…pussy…i used my thumb and pushed the bitch out from the bottom, but i cut my thumb and boy did it bleed
what if the laser doesn’t move back and forth, how do i fix that?